Proceedings of the
9th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2022)
15 – 18 November 2022, Singapore
doi:10.3850/978-981-18-6021-8_OR-18-0206
A Study on the Stability of the Vibration Durability Test Jig for a Hydraulic Hose using the ANSYS nCode module
Department of Mechanical Engineering, Changwon National University, 20-2, Changwondaehak-ro, Uichang-gu, Changwon-si, Gyeongsangnam-do, Republic of Korea
ABSTRACT
A jig for fixing the hydraulic hose was damaged during the vibration durability test of the hydraulic hose. Kim and Jeon identified the cause through ANSYS mode analysis and fatigue analysis, designed a new jig, and successfully conducted the vibration durability test of the hydraulic hose with this new jig. It was argued that the stability of the jig must be ensured before the vibration durability test, and ANSYS mode analysis and fatigue analysis were presented as technique to ensure the stability. This article proposes another method to ensure the stability of the jig for vibration durability test of the hydraulic hose by performing cause analysis and simulation on the newly proposed jig using the ANSYS nCode module instead of ANSYS mode analysis and fatigue analysis.
Keywords: Hydrualic Hose, Jig, Vibration Durability Test, ANSYS nCode module
Department of Mechanical Engineering, Changwon National University, 20-2, Changwondaehak-ro, Uichang-gu, Changwon-si, Gyeongsangnam-do, Republic of Korea
ABSTRACT
A jig for fixing the hydraulic hose was damaged during the vibration durability test of the hydraulic hose. Kim and Jeon identified the cause through ANSYS mode analysis and fatigue analysis, designed a new jig, and successfully conducted the vibration durability test of the hydraulic hose with this new jig. It was argued that the stability of the jig must be ensured before the vibration durability test, and ANSYS mode analysis and fatigue analysis were presented as technique to ensure the stability. This article proposes another method to ensure the stability of the jig for vibration durability test of the hydraulic hose by performing cause analysis and simulation on the newly proposed jig using the ANSYS nCode module instead of ANSYS mode analysis and fatigue analysis.
Keywords: Hydrualic Hose, Jig, Vibration Durability Test, ANSYS nCode module
