| 2K – Micro Injection Molding with Formicaplast “Industrial Solution for Precise Mass Production of Micro Parts”
Dipl.-Ing. Bjoern Dormann |
| Embedding of Fibre Optic Sensors within Flexible Host
E. Ferraris, T. Van Gijseghem, C. Yan, B. Van Hoe, G. Van Steenberge, P. Van Daele, P. Dubruel and D. Reynaerts |
| Integration of Micro Milling Highspeed Spindle on a MicroEDM-Milling Machine Set-Up
A. De Grave, H.N. Hansen and L. Andolfatto |
| Design of Passive Alignment Structures for the Batch Alignment of Micro Components
C. Brecher and M. Weinzierl |
| Production of Gratings by Means of Step and Repeat Hot Embossing
C. Brecher, C. Baum, K. Rinko, G. Schauerte and C. Wenzel |
| Flow Control in Microfluidic Chips: Material Choice and Smart Design
P. Debrauwer, J. Emmelkamp and P.J. Bolt |
| Development of a Flexible Gripper System for Small Optical Assemblies
R. Heikkilä, T. Prusi, M. Remes, R.Tuokko, T.H. Ha, J.Y. Song and C.W. Lee |
| A New Technology for Contamination Free Dispensing
K.-P. Fritz, C. Mannal, V. Mayer, M. Schober, F. Wolter and H. Kück |
| Development of an Injection Mould for the Integrated Photonic Induced Functionalisation of Polymer Parts
W. Michaeli and F. Klaiber |
| Development of the High-Speed Micro-Extrusion Machine to Investigate Size, Strain Rate, and Tribological Effects
N. Mahayotsanun, H.C. Lee, T.J. Cheng, Y. Chuang, K.Y. Tu, K. Ehmann and J. Cao |
| Development of Micro Positioning and Tilting System Having Flexure Hinges
Jongpil Choi, Hye-Jin Lee, Nak-Gue Lee, Seongouk Kim, Andy Chu and ByeongHee Kim |
| Surface Acoustic Wave (SAW) Sensors, the Development of a Versatile Sensor
B. Donohoe, G.E. O’Donnell and D. Geraghty |
