Micro Machining Process: Modelling, Characterization and Applications

Session Title	Micro Machining Modelling and Simulation
Date & Time	31-March-2015

	Force Modelling in Micro-Milling of Hardened Tool Steel R. Piquard, A. Gilbin, S. Thibaud and M. Fontaine
	A Predictive Model for Thin Plate Deformation in Surface Milling Jiunn-Jyh J. Wang and Chieh-Cheng Lin
	Cutting Force Prediction in Micro Orthogonal Cutting by an Analytical-Numerical Coupled Model A. Afsharhanaei, L. Rebaioli, P. Parenti and M. Annoni
	Performance of Micro End Milling Force Prediction on Aluminum 6061-T6 with 3D FE Simulation A. Davoudinejad, P. Parenti, L. Rebaioli and M. Annoni
	Multiscale Analysis of Nano-Scale Elliptical Vibration Cutting via Molecular Dynamics Simulations Lin Zhang, Li Zhang and Ping Guo

Session Title	Micro Machining Dynamics
Date & Time	31-March-2015

	Chatter Stability Improvement in Micro Milling with Axial Vibrations Chaneel I. Park, Paolo Parenti, Massimiliano Annoni and Simon S. Park
	Effect of Lubrication on Dynamic Instability in High-Speed Micromilling of Ti-6Al-4V Rinku Mittal, Kundan Singh and Ramesh K. Singh
	Modeling Three-Dimensional Dynamics of Rotating Micro-Endmills Including Attachment Errors B. Bediz and O. B. Ozdoganlar
	Parametric and Non-Parametric Identification of Micromilling Dynamics Marco Leonesio, Andreas Archenti and Paolo Parenti
	Modeling of Micro Drill Dynamics Based on 2-D Finite Element Method Xiaoliang Jin and Narahara Gopal Koya
	The Effect of Dynamometer Dynamics on the Measurement Accuracy of Micromachining Forces E. Korkmaz, Y. E. Bayiz and O. B. Ozdoganlar

Session Title	Micro Machining Process Performance
Date & Time	31-March-2015

	Test for Evaluating the Performance of Micro Milling Processes A. Garbellini, A. Attanasio, E. Ceretti and C. Giardini
	Analysing Machining Errors Resulting from a Micromilling Process using CT Measurement and Process Simulation Petra Kersting, Simone Carmignato, Sven Odendahl, Filippo Zanini, Tobias Siebrecht and Eugen Krebs
	Machining Error in Micro Dimple Milling Takashi Matsumura and Yuji Musha
	Improvement of Procedures for High Accuracy Micromilling of Flat Surfaces A. Banfi, L. Colombo, F. Cacciatore, L. Rebaioli and M. Annoni
	Microtool Wear Measurement and Assessment Giovanni Moroni, Stefano Petrò and Wahyudin P. Syam
	Rapid and Autonomous Optical Characterization of Tool Diameter and Cutting Edge Radius on Micro End Mills Justin D. Morrow, William Jen, Nicola J. Ferrier and Frank E. Pfefferkorn

Session Title	Micro Machining Process Characterisation
Date & Time	31-March-2015

	Size Effect in Micromilling of Superduplex Stainless Steel Adriane Lopes Mougo, Fábio de Oliveira Campos and Anna Carla Araujo
	Characterization of Vibration Assisted High-speed Microdrilling of Ti6Al4V Shubham Yadav, Ramesh K. Singh and V. Kartik
	Machinability on Micro-End Milling Process of Ti-6Al-4V with Nanofluid Minimum Quantity Lubrication using Hexagonal Boron Nitride Particles Dae Hoon Kim, Pil-Ho Lee, Jung Sub Kim and Sang Won Lee
	Process Parameters Optimization for Micro-Milling of EBM Ti6Al4V Titanium Alloy Z. Rysava G. Tristo and S. Bruschi
	An Experimental Study on Micro Milling of PZT deposited Si wafer Ken-Han Chen Ming-Chyuan Lu Chia-Che Wu Kuan-Ming Li and Yao-Yang Tsai
	Influence of the Micro-Patterned Inserts on the Characteristics of the Hard Turning Process Dong Min Kim, Ineon Lee, Sun Keel Kim, Bo Hyun Ki and Hyung Wook Park
	Effects of the Cutting Edge Serrations on the Brittle Fracture in the Glass Milling Takenori Ono

Session Title	Micro Machining Applications
Date & Time	31-March-2015

	Modeling and Manufacturing of Mechanically Machined Hologram Based on Repeated Arcs and End-milling Eun-Chae Jeon, Je-Ryung Lee, Hwan-Jin Choi, Tae-Jin Je and Hwi Kim
	The Effect of Intermittent Grinding on Burrs and Force Generated by Functional Textured Wheel Feng Liu, Perveen Asma, Sheng Huang and Yu Wang
	Adaptive Control Optimization in Micro-Machining of Hardened Steels Ricardo Coppel Jose V. Abellan-Nebot and Hector R. Siller
	Design of A Micro Machine Tool with Double-Toggle Mechanisms Shih-Ming Wang, Zhe-Zhi Ye, Chun-Chieh Wang, Yunn-Shiuan Liao and Shean-Juinn Chiou
	Overview the Fundamental Issues in PCB Micro-Drilling Industry Chao Wang, Mike Wellstead, Kai Cheng, Dave Goodwin, John Stratton and Richard Rakowski
	High Precision Coupling System Eike Foremny, Christian Schenck and Bernd Kuhfuss