 | Vibration Analysis of Fast Reactor Core Subassembly
C. Vishnu Pandi and K. Srinivasan |
| Analysis and Design of Corner-Supported Composite Skewed Hypar Shell Roof Under Low-Velocity Impact
Sanjoy Das Neogi, Amit Karmakar and Dipankar Chkravorty |
| Free Vibration Analysis of Cracked Thin-Walled Channel Section Beam with Warping Effects
Palash Dey and S. Talukdar |
| Model Option to Obtain Forward Solution in Particle Filter Method for Identification of Moving Load on Bridge
R. Lalthlamuana and Sudip Talukdar |
| Experimental Study and Modeling of Gas Metal Arc Welding Process to Produce 6061-T6 Aluminium Alloy Butt Joint
Rajesh P. Verma, K. N. Pandey, Nitin Kumar and Saim Saleem |
| Seismic Analysis of Dam-Reservoir System Using Direct Coupling
Kalyan Kumar Mandal and Damodar Maity |
| Dynamic Dam-Foundation Interaction Analysis Comnsidering Direct Coupling Method with Unified Viscous Boundary Condition
Angshuman Mandal and Damodar Maity |
| Uniformly Loaded Composite Hypar Shell Roofs Under Progressive Failure
Arghya Ghosh and Dipankar Chakravorty |
| Analysis of Damage in Steel Cylindrical Test Specimen
Manoj Kumar and P. M. Dixit |
| Neural Network Model to Predict the Remaining Life of Corroded RC Beams
Smitha Gopinath, A. Ramachandra Murthy and Nagesh R. Iyer |
| Mathematical Modelling of Textile Reinforced Concrete
Smitha Gopinath, A. Ramachandra Murthy and Nagesh R. Iyer |
| Seismic Analysis of Neutron Detector Along with Handling CUM Shielding Assembly of PFBR
Suman Sarkar and S. S. Taliyan |
| Stress Intensity Factor Evaluation for Cracks Emanating from a Bolt Hole of Pressurized, Pretensioned Flanged Bolted Joints
P. Padmanabhan, Raghu V. Prakash and R. Muthukumar |
| Design and Analysis of a Blast Resistant Fixture
K. Venkataramana, R. K. Singh, Anindya Deb, Vivek Bhasinm, K. K. Vaze and H. S. Kushwaha |
| Wave Propagation Analysis of Curved Beams Using the Spectral Finite Element Model
Namita Nanda and Santosh Kapuria |
| Thermal Effect in the Design of Rotating Nonuniform Disks Considering Variations in Density and Elasticity Modulus
Priyambada Nayak and Kashi Nath Saha |
| Reduced Order Modeling and Uncertainty Quantification for a Stochastic Linear Dynamical System
Hridya P. Lal, Sunetra Sarkar and Sayan Gupta |
| Non Linear Analysis of Precast Beam-Column Dowel Connections
R. Vidjeapriya and K. P. Jaya |
| Handling Analysis of Multi-Axle Off Road Armoured Vehicle
Vinit V. Jagirdar , Vikas P. Maskar, K. Senthil Kumar and M. W. Trikande |
| An Internal Conical Mandrel Loading Technqiue to Evaluate Fracture Behavior of Fuel-Clad Tubes
M. K. Samal, S. S. Das, V. Bhasin and R. K. Singh |
| Analysis Of Sandwich FGM Plates Using a Four Node Quadrilateral Element Based on Third Order Theory
M. Yaqoob Yasin, Santosh Kapuria and Mayank Patni |
| Effect of Normal Deformability on the Performance of Global-Local Theories for Smart Composite Plates in Thermal Environment
Jayanta Kumar Nath and Santosh Kapuria |
| Investigation of Material Flow Behavior in a Flexible Spring Conveyor for Transport of Active Materials
M. K. Samal, B. V. Arun Kiran, N. Krishna Murty, G. V. Rama Krishna Murthy, V. Bhasin and R. K. Singh |
| Finite Element Modeling and Simulation of CFRP Shells Under Axial Impact Using LS-Dyna®
A. Vasanthanathan, P. Nagaraj, J. Jerold John Britto |
| Non-Linear Forced Vibration of Axially Functionally Graded Tapered Beam with Different End Conditions
Sachin Sahu and Anirban Mitra |
| A Computer Method for M-N-Φ Analysis of Prestressed RC Cross-Sections
Cosmin G. Chiorean, Ioana Marchis and Marius Buru |
| Behaviour of Cold-Formed Steel Plain Channels Under Eccentric Compressive Loads
G. Beulah Gnana Ananthi G. M. Samuel Knight and Nagesh R. Iyer |
| Finite Element Modelling and Simulation of Advanced Stiffened Shell Structures Using LS-DYNA®
A. Vasanthanathan, P. Nagaraj and J. Anish Jafrin Thilak |
| Simulations for Seismic Performance of Uncorroded and Corroison Affected Beam Column Joints
A. Kanchana Devi, Saptarshi Sasmal and K. Ramanjaneyulu |
| Control of Geometrically Nonlinear Vibrations of Functionally Graded Multiferroic Composite Doubly Curved Shells
S. C. Kattimani and M. C. Ray |
| Assesment of IZIGT for Boundary Layer Effects in Levy-Type Smart Piezolaminated Plate
Susanta Behera and Poonam Kumari |
| Numerical Analysis of Fracture Behavior of 20MNMONI55 Pressure Vessel Steel in Transition Region
Avinash Gopalan, M. K. Samal and J. K. Chakravartty |
| Micromechanical Simulation of the Interfacial Behaviour of Nano Engineered Epoxy-CFRP Composites
S. Priya Dharsini, B. Bhuvaneshwari, M. Surendran, G. S. Palani, G. Mohan Ganesh and Nagesh R. Iyer |
| Finite Element Analysis to Compute Stresses in a Cooling Tower Model Based on Linear Superposition of Measured Wind Pressures
S. Selvi Rajan, R. Jibeesh, G. Ramesh Babu, P. Harikrishna and A. Abraham |
| Simulation of Plate with Crack Using Extended Finite Element Method
Virender Kumar, I. V. Singh, B. K. Mishra and G. Bhardwaj |
| Effect of Embedded Delamination on Stiffened Composite Plates Subjected to Compressive Loads
Godse Prasad, Lalitha Chattopadhyay and Akash Mohanty |
| Simplified Limit State Design Procedure for RC Tall Buildings Subjected to Earthquake and Extreme Wind Loads
K. Rama Raju, R. R. Aathish Narayanan and Nagesh R. Iyer |
| Numerical Studies on In-Situ Stress Evaluation in Concrete Structural Elements Under Biaxial Condition by Trepanning Technique
S. Parivallal, K. Ravisankar, K. Kesavan and K. Nagamani |
| Boundary Effect on Fracture Energy of Quasi-Brittle Bi-Material Interfaces
G.S.Vijaya Bhaskara and J.M.Chandra Kishen |
| An Investigation on the Development of 6082-T6 Aluminium Matrix Composites
C. Kirubha, V. Arun Kumar and A. Tony Thomas |
| Comparative Study of Performance of DPM and MDPM for Modelling Creep of Concrete
Shatabdi Mallick, M. B. Anoop and K. Balaji Rao |
| Probabilistic Analysis of Modulus of Elasticity of Concrete Through Multiscale Modelling
S. Maheswari, M. B. Anoop and K. Balaji Rao |
| Finite Element Analysis of Reinforced Concrete Structural Components under Impact Simulation
A. Ramachandra Murthy, G. S. Palani, Smitha Gopinath, V. Ramesh Kumar and Nagesh R. Iyer |
| Damage Tolerant Analysis of Stiffened Aluminium Alloy Panels Under Fatigue Loading
A. Ramachandra Murthy, G. S. Palani, Smitha Gopinath and Nagesh R. Iyer |
| Effectiveness of Tube Core Sandwich Panels in Structural Protection Against Blast Loads
N. Anandavalli, J. Rajasankar, Amar Prakash, C. N. Janardhan and Nagesh R. Iyer |
| Investigating Seismic Demand Due to Bi-Directional Shaking Per IDA Based Fragility Curve
Abhik Kumar Banerjee, Debdulal Pramanik and Rana Roy |
| Estimation of Thermal Boundary Conditions in Cooling Stage of Glass Using Digital Photoelasticity
P. Tarkes Dora, K. Ramesh and Puneet Mahajan |
| Nonlinear Vibration Analysis of 3D Beams
S. Gurumoorthy and L. Bhsaskara Rao |
| Structural Damage Detection Using Time Series Models and Cepstral Distances
K. Lakshmi and A. Rama Mohan Rao |
| Damage Diagnostic Algorithm Based on Null-Subspace Considering Environmental Variability
A. Rama Mohan Rao, K. Lakshmi and Varun Kasireddy |
| Static Analysis of Functionally Graded Sandwich Shells Using a Layerwise Theory
Shashank Pandey and S. Pradyumna |
| Simulation of Fatigue Characteristics of Reinforced Concrete Beams
Nawal Kishor Banjara, K. Ramanjaneyulu, Saptarshi Sasmal and V. Srinivas |
| Behaviour of Steel Beam Sections for Lateral Torsional Buckling
R. H. Munde and B. M. Dawari |
| Models for Compressive Strength Development with Time and Modulus of Elasticity of Concrete with Fly Ash
G.S.Vijaya Bhaskara a , A.Santosh Kumar, S.Saravanan, G.Vincent Vivek, M.B.Anoop and K.Balaji Rao |
| A Novel Method for Computation of Mixed Mode Stress Intensity Factors of 2D Cracked Configurations
S. Sajith, K. S. R. K. Murthy and P. S. Robi |
| Determination of Mode I Stress Intensity Factor for Orthotropic Laminates Using a Single Strain Gage
Debaleena Chakraborty, D. Chakraborty and K. S. R. K. Murthy |
| On Numerical Analysis of Elastostatic Plate with Hole
Payal Desai and Tarun Kant |
| Coupled Plate-String Vibrations of a Stiff String Against an Obstacle: Application to Musical Instruments Like Sitar
Ashok K. Mandal and P. Wahi |
| Time Frequency Analysis for Nonlinear Identification of Structures
J. Prawin and A. Rama Mohan Rao |
| Importance of Accomodating Induced Potential Effects in the Modelling of Shear Monomorph Sensors
Litesh N. Sulbhewar and P. Raveendranath |
| Effect of Thickness on Mode Shape and Critical Load for Dished Shallow Shells
Surya Mani Tripathi, S. Anup and R. Muthukumar |
| Multiscale Model for Prediction of Creep of Concrete
S. Maheswari, M. B. Anoop and K. Balaji Rao |
| Effect of Boundary Condition on Performance Of RC Beam During Fire
M. Naga Sandeep, Hitesh Lakhani and Subhash C. Yaragal |
| Effect of Initial Geometric Imperfection on the Vibration Characteristics of Composite Plates
N. Kshamith, Mohammad Talha, N. G. R. Iyengar and A. K. Bakshi |
| Design and Nonlinear Analysis of vs Coil Feeder Oblong Bellows of Cryostat
Saroj Kumar Jha, Girish Gupta, Manish Kumar Pandey, Vipul More and Anil Bhardwaj |
| Effect of Thermal Environment on Vibration Response of Functionally Graded Material
L. Sandeepreddy, Md Talha, N. G. R. Iyengar and Ashok Bakshi |
| Damage Assessment of Composite Structures From Changes in Natural Frequency Using Unified Particle Swarm Optimization
Bharadwaj Nanda, T. R. Jebieshia, Dipak K. Maiti and Damodar Maity |
| Size Independent Concrete Fracture Energy Investigation
N. Trivedi, R. K. Singh and J. Chattopadhyay |
| Numerical Modelling for Characterizing Concrete Fracture Parameters
N. Trivedi, R. K. Singh and J. Chattopadhyay |
| Numerical Simulations for Structural Response of Masonry Arch Bridge with Relieving Slab as Upgradation Strategy
V. Srinivas, Saptarshi Sasmal, K. Ramanjaneyulu and Thavamani Pandi |
| Numerical Studies on the Influence of Interface Properties on the Response of Piezoelectric-Elastic Smart Beam
R. Kiruthika and V. Srinivas |
| Evaluation of Long-Term Deflection of PSC Beam Using FE Model
M. C. Lalanthi, P. Kamatchi, K. Balaji Rao, S. Parivallal, K. Ravisankar and Nagesh R. Iyer |
| Comparative Study of Mistuned Cyclic and Chained Structures
Pradeep Malaji and S. F. Ali |
| Comparative Effectiveness of Stent-Graft Designs in Curved Vascular Systems
Ankur Mathur and Anamika Prasad |
| Influence of Size Effect on Fracture Properties of Concrete-Computational Approach
K. Sudheer, J. S. Kalyana Rama and K. Muthu Lakshmi |
| Probabilistic Capacity Models for Reinforced Concrete Column Subject to Blast Loading
Katchalla Bala Kishore, B. Saran Srikanth and Hrishikesh Sharma |
| Numerical Study of Seismic Resposne Reduction in a Typical Process Column Using Lead Extrusion Dampers
A. Ravi Kiran, M. K. Agrawal, G. R. Reddy, R. K. Singh and K. K. Vaze |
| Evaluation of Effect of Crack on Natural Frequencies of Beams
K. B. Patale and V. B. Dawari |
| Onset and Growth of Cracks Effecting Dynamic Stability of Laminated Cylindrical Shells
R. R. Das, I. Panigrahi and B.M. Hembram |
| Control of Vehicle Vibration Using Dynamic Inversion Technique
A. M. Siddiqui and S. Faruque Ali |
| Rate Dependent Strain-Space Plasticity Formulation
B. M. Dawari and R. S. Iyengar |
| Dynamic Analysis of a Monopile Supported Offshore Wind Turbine
K. A. Abhinav and Nilanjan Saha |
| Performance Evaluation of Honeycomb Sandwich Panels for Airport Pavement
Sumit Rathore and Hrishikesh Sharma |
| Geometrically Nonlinear Analyses of Laminated Composite Plates Using an Inverse Hyperbolic Shear Deformation Theory
V. M. Sreehari and D. K. Maiti |
| Numerical Study of Blast Load on Building Column Element Using ANSYS AUTODYN
G. Manikandan , Shirlin Charles and C. Umarani |
| Contact Stress Analysis and Fatigue life Estimates of Aircraft Structural Joints
B. V. Sravan Kumar, Siddharth Singh, L. Chikmath and B. Dattaguru |
| Damage Analysis of Curved Composite Structures Using Interface Elements
Raju, David Lyons and Prusty BG |
| Estimation of Stress Intensity Factor and Interaction Behavior of Cracks in a Helical Coil Spring
H.Anand and V.Chandrasekharan |
| High Temperature Gurson Modeling
A. K. Asraff, S. Sheela , S. Savithri and Titty Susan Thomas |
| Shear Buckling Response of Laminated Plates Considering Pre-Buckled Stress State
Alfia Bano, Ashwini Kumar and P.M. Mohite |
| FE Modeling of Piezoelectrics for Vibration Control of Flexible Structures
Akash Rajan, V. S. Hari Vijayan, Mathew John and Jayaraj Kochupillai |
| Estimation of Long Term Deflections of RC Beams
Girishwetha S. R, Chaithra B. E., K. Balaji Rao, M. B. Anoop and Leelavathi K. S |
| Buckling Analysis of Laminated Plates Subjected to Partial Edge Loading
T. Rajanna, Sauvik Banerjee, Yogesh M. Desai and D. L. Prabhakara |
| Analysis of Elastic Body Using Square Discrete Element Method
Rajesh P. Nair and C. Lakshmana Rao |
| Numerical Studies on Stem of T-Stub Bolted Connections
M. Saravanan, V. Marimuthu, M. Surendran, P. Prabha and G. S. Palani |
| Numerical Studies on the Behavior of Self-Drilling Screw Beam-Column Joints
V. Marimuthu, G. S. Palani , S. R. Satish Kumar, M. Surendran, M. Saravanan and P. Prabha |
| Modeling of Mechanical Response of PVDF
L. Harish and C. Lakshmana Rao |
| Experimental Identification and Numerical Simulation of Lamellar Cu-Ag Composites under Large Plastic Deformations
Dodla Srihari, Albrecht Bertram and Manja Krüger |
| Analysis of Annular Footings and Anchors Lying on Elastic Soil Medium Using Finite Difference Technique
Shahryar K. Ahmad, V. Srinivasan and Priyanka Ghosh |
| Experimental and Numerical Investigation on Longitudinal Wave Propagation in ROD with Structural Discontinuity
T. Jothi Saravanan, N. Prasad Rao and SN. Gopalakrishnan |
| Mesh Free Reproducing Kernel Particle Method for Analysis of Functionally Graded Materials
Basant Kumar, Ram Kumar Gupta and Amirtham Rajagopal |
| A Boundary Collocation Method for Fracture Analysis of Notched High Strength Concrete Beam
Abhishek Kumar, A. Ramachandra Murthy, Smitha Gopinath and Nagesh R. Iyer |
| Proper Orthogonal Decomposition of Randomly Varying Pressures from Wind Tunnel Tests on 2-D Rectangular Section
M. Keerthana and P. Harikrishna |
| Reliability Analysis of Transmission Line Tower Members Using Afosm Method & MCS
R. P. Rokade, K. Balaji Rao, B. Palani and Nagesh R. Iyer |
| Influence of Opening Size on the Displacement Response of Squat Shear Wall
G. Muthukumar and Manoj Kumar |
| Response of R.C. Framed Buildings with Masonry Infills Having Openings Under Lateral Loading
M. A. Manju and K. S. Nanjunda Rao |
| Failure Modeling of Steel Structural Tee Joints Under Blast Loading
Agesh Markose and C. Lakshmana Rao |
| Numerical Form-Finding of a Tensile Membrane Structure Using Dynamic Relaxation Method
Subhrajit Dutta and Siddhartha Ghosh |
| Seismic Performance Enhancement of Truss Towers with Viscous Fluid Dampers
K. Rama Raju, R. R. Aathish Narayanan and Nagesh R. Iyer |
| Simulation of Ratcheting Behaviour in SA 312 Type 304LN Stainless Steel Elbows
S. Vishnuvardhan, G. Raghava , S. Lincy Rubina and P. Gandhi |
| A Damage Mechanics Framework to Model Fatigue Damage in Concrete
K. M. Pervaiz Fathima and J. M. Chandra Kishen |
| Rate-Dependent Laminate-Based Approach for Modelling of Ferroelectric Single Crystals
Dinesh K. Dusthakar, Thorsten Bartel, Björn Kiefer, Andreas Menzel and Bob Svendsen |
| Comparative Performance of Single and Double Side Stiffeners for Buckling Analysis of Plates
Muhammed Jouhar and P. Jayabalan |
| An Efficient Implementation of a Multi-Frontal Solution Scheme for Substructure Based Finite Element Structural Analysis Software
P. Deepak, P. V. Anil Kumar, T. Sundararajan and P. Balachadran |
| A Parametric Study to Identify the Effect of Irradiation on Crystal Plasticity Parameters
Nevil Martin Jose, P. V. Durgaprasad and B. K. Dutta |
| Isogeometric Analysis of Shells with Folds and Intersections
G S Pavan and K S Nanjunda Rao |
| Behavior of Non-Propagating Cracks in Concrete Under Fatigue
Nimmy Mariam Abraham and J. M. Chandra Kishen |
| Modified Computational Southwell Plot - A Tool for Global Buckling Mode
P. V. Ahsana, Mayank Tripathi and Kashif Omar |
| Magnetomechanical Instability and Buckling Failure in Hollow Al-6061 Cylinders
S. Madhavan, V. Mehra, C. D. Sijoy, S. Pahari and S. Chaturvedi |
| Studies on Effect of Corrosion on Strength and Ductility Characteristics of RC Beam-Column Joints
T Nagender, Y.M. Parulekar, G.R. Reddy, R.K. Singh and K.K. Vaze |
| Modelling Progress to Failure for Advanced Composites
C. Ganesan, P. S. Joanna, A. Rajaraman and Dalbir Singh |
| Remaining Life Assessment of Damaged Carbon Fiber Reinforced Composites
Dalbir Singh, A. Rajaraman and C. Ganesan |
| Analytical Solutions for Laminated Composite Plates Considering Nonlocal and Shear Deformation Effects
Piska Raghu and Amirtham Rajagopal |
| Nonlocal Nonlinear Finite Element Formulations for Analysis of Beams Considering Surface Effects
Preethi Kasirajan and Amirtham Rajagopal |
| A General Cohesive Contiuum Mechanics Framework for Constitutive Modeling of Self-Healing Materials
Ammar Alsheghri and Rashid K. Abu Al-Rub |
| An Efficient Performance Based Seimic Design for Rc Framed Structure Designed as per IS 1893 (2002)
Arshad K. Hashmi |
| Finite Element Analysis of a Gun Saddle for Weight Reduction
Prithipal Singh, S. K. Panigrahi and S. K. Nayak |
| Uncertainty Quantification Using Wiener Chaos Expansion
V. Anis Mohammed and S. T. G. Raghukanth |
| Out-of-Plane Stress Analyses of Functionally Graded Adhesively Bonded Tee Joint of Laminated FRP Composites
S. V. Nimje and S. K. Panigrahi |
| Non-Linear Bending Study of Shear Deformable Functionally Graded Plates using Efficient Finite Element Method
Gulshan Taj M.N.A, Anupam Chakrabarti and J. Jenifar Monica |
